Page 116 - FASCO 2013

116
www.fasco.com • 800-325-8313 • fax 800-352-7207
Notes Glossary
Below is a quick reference listing of numbers you will find in the notes column of
FASCO’s model charts throughout the catalog, and their respective meanings.
1 4M 370V capacitor
2 7.5M 370V capacitor not included
3 6M 370V capacitor
4 Water Heater Draft Inducer
5 Special low-temperature oil
6 Includes 4M 370V capacitor
7 Includes shaft bushing
8 Does not have shaft bushing
9 3M 370V capacitor
10 Has hall effect sensor
11 5M 440V Capacitor
12 10M 370V Capacitor
13 7.5M 370V Capacitor
14 7.5M 440V Capacitor
15 20M 370V Capacitor
16 Rotation is determined by viewing lug end
17 7.5M 370V Cap installed
18 Rotation is determined by viewing lug end.
19 Original motor is SP, D1050 is PSC to provide greater motor
efficiency and permit closing shaft end of motor to prevent
moisture from entering motor.
20 Not a direct replacement, but suitable for referenced models.
21 Rotation is determined from viewing lug end
22 2M 370V Capacitor
23 4 MFD 370V Capacitor
24 15M 370V Capacitor
25 Equipped with KFAN6046 fan blade
26 4M 250V Capacitor included
27 12.5M 370V Capacitor
28 4MFD 370V Capacitor included
29 4M 370V capacitor included
30 Special low temperature oil
31 5M 370V Capacitor
32 Not a direct replacement for 5KCP49SG1010S, but is an
acceptable substitute.
33 Stainless steel shaft
34 Mounts on (3) P/N 0061-1518 Coleman Mounts
35 Has 8 drilled and tapped holes in shell
36 Has 4 drilled and tapped holes in shell
37 Includes 8 drilled and tapped holes in shell
38 4MFD, 370VAC capacitor rating (not included)
39 4MFD, 370VAC capacitor rating (included)
40 Original motor is SP, D1050 is PSC to provide greater motor
efficiency and permit closing shaft end of motor to prevent
moisture from entering motor.
41 Includes centrifugal switch
42 25M 370V Capacitor
43 Packed 6 per carton
44 Packed 1 per carton
45 Speed nut and vibration damper included.
46 Belted Fan & Blower Motor
47 56H Mounting
48 145T Frame
49 Mechanically Reversible
50 3M 370V Capacitor Included
51 3-1/2” SHAFT HEIGHT
52 6M 370V capacitor included
53 4M 370 capacitor included
54 5M 370V capacitor included
55 Has internal fan & 3.5” BC mounting holes for GE 21/29 Frame
replacement.
56 Drilled and tapped holes in case for Coleman mounting
57 Luxaire/Whisperaire
58 With plug for Penn Ventilator
59 Repl. For Siegler & Williams Wall Heaters
60 Penn Ventilator
61 Repl. For Butler & Leslie-Locke Roof Ventilator--BX Connector
62 Hub only on shaft end
63 Repl. For Leslie-Locke Roof Ventilator
64 Sterling Radiator Co.
65 For use with Greenheck Fan
66 Shaft stepped down from 3/8” dia. Shaft
67 OEM direct replacement for Jenn Air 80CR
68 Used in Jenn Air units. P/N 7108-2101
69 Used in Leslie Locke ventilators original P/N 7108-5056
70 Used in Acme Eng. Roof Vents
71 ILG ventilator 7108-2171. Has internal fan.
72 External oil retainer to accommodate resiliant rings and cradle base,
drilled and tapped holes in case for mounting in Coleman applications.
(2 holes each end on case OD).
73 Mechanically Reversible
74 Popular Ice Machine pump motor
75 Shell Turbo 68, low temp. oil (-40°F)
76 Impedence Protected
77 Has hubs for end rings
78 Closed construction
79 See Tecumseh OEM section for cross references
80 With conduit box
81 PSC motor requiring a 10 MFD 370V cap
82 Rotation determined by viewing lug end
83 Totally enclosed, Sears-Whirlpool 5000-8000 BTU units.
84 4M 370V capacitor (similar to GE WJ94X306)
85 Air Over
86 Drilled & Tapped Holes (No. 8-32NC) in face of case at shaft end for
mounting in various Coleman mobile home furnace applications, also
has mounting studs.
87 Used in Economite, “E-20”, LS1/Miller and Mid Continent gas units.
88 3 small lugs for Kit 55S
89 4 grommets to fit lugs on Kits 34, 49, 50, 55L, 55S
90 15 MFD 370V
91 7.5MFD 370VAC capacitor
92 Shaft up or horizontal applications
93 Motor has increased stack for higher ambient temperatures
94 7.5 m 440V Capacitor
95 Comes with unmounted conduit box.
96 Has maximum ventilation for high ambient temperatures
97 All angle mount bearings
98 All angle mount bearings. Use rainshield when necessary.
99 All angle mount bearings.
100 10 MFD 370V
101 7.5 MFD 370V
102 20 MFD 370V
103 Ideal for blowers and fans used in furnaces and air-conditioners
104 The capacitor and base are included
105 Ideal versatility using Kit 200 “X” brackets to accommodate various
cradle base lengths
106 Includes dust seal
107 Includes pull-chain switch
108 12.5MFD 370V capacitor included
109 No pedestal yoke mount
110 Blower system designed to enhance heat output from home fireplaces.
Kit includes variable speed control and temperature sensor switch.
111 Application: Designed for use in residential outdoor condenser fan and
heat pump units (primarily up to 3.5 ton)
112 Vibration motor
113 PSC version of D1189 (OEM Replacement for Krack Refrigeration.
114 Separate connection for each voltage
115 Not a direct replacement for 253-1194, but is an acceptable substitute
116 Replacement for Airease
117 Not a direct replacement for 253-1194, but is an acceptable substitute
118 10M 370V capacitor not included
119 Has special OEM wiring configuration. Not for general purpose 3 speed
applications
120 Use Fan Blades with round hub I.D.
121 Two Speed Motor
122 K110 has maximum flat length
123 Double Shafted
124 All mounting holes drilled and tapped.
125 Continuous Duty
126 3/8” shaft diameter with adapter to convert to 1/2” diameter
127 Front endshield drillled and tapped with four 10-32 threads on 3.5”
bolt circle
128 Electrically Reversible
129 Repl. For ITT REZNOR
130 Do not have extended hubs or rubber rings for base mount
131 Motors include shaft bushing
132 Open vented on opposite shaft end
133 Shaft down or horizontal applications
134 Does not have removable conduit boxes
135 Special wiring configuration. Cannot be used with SPDT switching.
136 Does not come with conduit box.
137 Ideal for blowers and fans used in furnaces and air-conditioners.
138 Not CSA certified
139 All angle mount bearings. Use rainshield when necessary
140 Has 10’ cordset
141 Keyed shaft
142 Vertical shaft down application.
143 All motors individually boxed.
144 Resilient Base
145 Interchangeable with GE 21 & 29 Frame motors and other Emerson,
Universal and Franklin refrigeration motors
146 Interchangeable with GE 21/29 Frame and Universal Motors
147 Comes with 2 1/2” O.D. Rubber Mounting Rings
148 Weld nuts on 3.5” B.C. for stud mount
149 Wiring slightly different from OEM PSC; check nameplate connection
diagram. Capacitor and Bracket included. Replaces 2 and 3 speed SP
and PSC motor. Motor in Gibson/Belding window units.
150 Endshield on D520 is easily removed, allowing rotor and shaft
to be rotated, thereby reversing motor rotation.
151 Has keyed shaft
152 Ideal for unit heaters
153 Agricultural applications
154 Extended hubs with rubber rings for base mount
155 Includes 8 drilled and tapped holes in shell.
156 Interchangeable with GE 21 & 29 Frame motors & other Emerson,
Universal & Franklin Refrigeration motors
157 All angle mount sleeve bearings
158 All Rubber rings are used with direct drive blower motors
and “Clamp” type supports.
159 D180 for International Oil Burner Co.- Furnaces MAC5A, 1045, 1052,
1060, 1145, 1155, 1165, 1175, 1265, 1380, 7040, 7060.
160 Henrite are rubber mounting rings with steel band, used with cradle
bases and knife edge motor supports.
161 Hubless endshields for flush mounting
162 Ideal for lug mounting using lug Kit 55L or 55S
163 Internal cooling fan
164 Rotation is facing side opposite hub
165 Skeleton Motor
166 3.25” Diameter
167 Self-Cooled
168 10M 440V Capacitor
169 Mounting bracket designed to match the original motor (four 8-36
drilled and tapped holes)
170 Mounting hardware included
171 Has 22” leads with 1/16” thick insulation
172 Three studs opposite shaft end are 8-32 on a standard
2.84” bolt circle, 120° apart
173 3.9” diameter
174 Includes 1/2” studs for mounting
175 Bolt circle = 3.15”
176 Endshield on D520 is easily removed,
allowing rotor and shaft to be rotated,
thereby reversing motor rotation.
177 Used in Economite, “E-20”, LS1/Miller and Mid
Continent gas units.
178 External oil retainer to accommodate resiliant rings and
cradle base, drilled and tapped holes in case for mounting
in Coleman applications. (2 holes each end on case OD).
179 Self cooled for mechanical duty
180 Can be operated on 50Hz with air-over applications
181 3 1/2” shaft height
182 Has internal fan & 3.5” BC mounting holes for
GE 21/29 Frame replacement.
183 Drilled and tapped holes in case for
Coleman mounting
184 D180 for International Oil Burner Co.- Furnaces MAC5A, 1045, 1052,
1060, 1145, 1155, 1165, 1175, 1265, 1380, 7040, 7060.
185 Rooftop Ventilator
186 Unit Heater
187 Includes shaft water slinger
188 60° ambient temperature rating
189 Closed end shield shaft end
190 All angle mount bearings. Use rain shield when necessary.
191 Should not be used for replacements where original motor is rated
below 1500 RPM
192 Ideal versatility using Kit 200 “X” brackets to accommodate various
cradle base lengths
193 Poultry and Hog House fan motor
194 Condenser Fan Motor
195 50/60 Hz
196 Draft Booster/ Flue Exhaust/ Switch Motors
197 For 208V use 7.5M 370V Capacitor and 240V use 6M 370V Capacitor
198 Has special OEM wiring configuration. Not for general purpose
3 speed applications
199 Original motor is SP, D1050 is PSC to provide greater motor
efficiency and permit closing shaft end of motor to prevent
moisture from entering motor
200 Not a direct replacement for 5KCP49SG1010S, but is an acceptable
substitute.
201 Not a direct replacement for 253-1194, but is an acceptable substitute
202 Original motor is SP, D1050 is PSC to provide greater motor
efficiency and permit closing shaft end of motor to prevent
moisture from entering motor.
203 Leads require modification
204 100,000 BTU Furnaces
205 Window A/C Using Delco Inside-Outside Motor 485932, KCP39PG9769S