www.aosmithmotors.com
Index of Footnotes
197 Includes 2 speed plug
198 Impedance protected
199 Horizontal rigid base
200 Has special 3.15 bolt circle
201 Four studs on a 5.15 diameter bolt circle
202 For motor only, use J375
203 For motor only, use J373
204 For motor only, use J372
205 For motor only, use J370
206 MasterFit motor, for additional information
see page 73
207 Fleximount arms are not attached to motor -
bellyband with arms is packed with motor
208 Fits most 38GS Series
209 FB1106 & FR1106 also replaces motor used on
Kramer Trenton units DD661, DD791 (use FR1106
for vertical applications
210 FB1076/FR1076 also replaces Kramer Trenton 045-
004 and Universal HF3W0R8K, HF3W052N
211 FB1056 is the same as FB1056X
212 FB1056 also replaces Dunham Bush motor MTR-
226
213 Farm duty - gasketed conduit box and capacitor
cover
214 F2 Assembly
215 Eyelet terminals on the leads
216 Equipped with rotation switch for easy
reversibility
217 Equipped with provisions for mounting 4 X 4
conduit box
218 Energy efficient $ - split phase start/capacitor run
219 Dual voltage connection: black-common, white-120
volt, red-240 volt
220 Dripcover kit available (Part # 103017-03)
221 Does not have conduit box
222 Does not have aluminum adapter bracket
223 Direct replacement for Surge milk pumps, Babson
motor #27732, requires 30MFD/370VAC capacitor,
separately - not supplied
224 Direct replacement for GE WB26X24, WB26X40 and
WB26X45
225 Direct replacement for gaffer and sattler and
dyna vent
226 Direct replacement for Carlin 27490S
227 Direct replacement for Beckett 21805U
228 CWSE not reversible
229 CWLE rotation
230 CSA approvable not applicable
231 Includes 8/32 mounting studs
232 Closed main frame, 2 1/2 rings, 14 leads
233 Class B insulation
234 Century nameplated product
235 Centurion II motors are switchless. Designed in a 48
frame shell diameter that is .80 inches smaller than
the 56 frame Centurion and Centurion SE designs
236 CCW rotation facing opposite shaft end
237 Carrier replacement for HD60FK651, special
BA dim. = 4.12
238 Carrier replacement for HD60FK652, special
BA dim. = 4.12
239 Capacitor attached
240 Capacitor and rainshield included
241 Capacitor and rain shield included
242 BX connector
243 Base & clamp included, 9.44 ring to ring dimension
244 Ball/sleeve construction
245 Ball Bearing, for motor only, use J320
246 B668 fits pump #LA01N manufactured March, 1997
to present
247 B667 fits pump #LA01 manufactured March, 1997
and prior
248 B14 mount
249 Arneson Pool Sweep
250 Also 1/10 Hp at 1050 RPM
251 All 1 HP and 1 1/2 HP motor supplied with
conversion kit allowing motor to be used in most 56
frame applications
252 8.5 foot conductor cord and plug with strain relief
attached
253 5/8” dia. keyed and flatted shaft 6” long
254 8.26” bolt circle, .28” diameter mounting holes
255 70 degree C ambient
256 7-3/8” diameter bolt circle
257 60 HZ only
258 6 MFD/370V @ 230V, 8MFD/370V @ 280V
259 575 volt brake coil
260 56Z = 1/2” flatted shaft
261 56Z = 1/2” flat X 1-1/2” shaft, 3 1/2 shaft height
262 56Z = 1/2”’ flat X 1.62” shaft, with 56 FR. Base
263 53” leads
264 50/60 HZ 1.4/1.7 Amps
265 50 leads, 2 1/2 resilient rings
266 50 HZ, 190/380 volt, 925 RPM
267 50 HZ - 1.00 service factor, 190/380 volt
268 50 HZ
269 50 cycle only
270 5/8 keyed shaft with flat
271 5/8 keyed shaft
272 5/16 diameter shaft
273 48Z = 5/8 dia. X 2 shaft, with 3 height
274 48Z = 1/2 flat X 1.88 shaft, with 48 FR base
275 48-56 frame mounting - 3 shaft height, sleeve and
key adapter to 5/8 shaft
276 48-56 frame mounting - 3 1/2 shaft height, sleeve
and key adapter to 5/8 shaft
277 47” leads
278 40” leads
279 4 thru bolts and 4 dummy studs on a 5.16 diameter
bolt circle
280 4 in 1 multi-horsepower motor, replaces 1/3, 1/4,
1/5, 1/6 HP
281 36” leads
282 3450 RPM for 60 HZ and 2875 RPM for 50 HZ
283 31” line leads, 5 capacitor leads
284 31” leads (minimum)
285 3/8-16, Left hand threads, CWPE rotation
286 3.5 shaft height
287 3 shaft height
288 26” leads (minimum)
289 12-1/4” leads
290 230V and 208V connection, same torque
291 208 Volt @ 1.0 Service factor
292 20” leads
293 9” leads
294 2.6” shaft height
295 2 shaft length and 1/2” shaft diameter, sleeve and
key adapter to 5/8”
296 2-Speed shipped less hi-lo switch for remote control
297 184T base, 4.5 shaft height
298 2-1/4 X 7/8 keyed shaft
299 15” leads
301 115 volt tap off main winding to power gear drive
unit
302 11” leads (minimum)
303 11” leads
304 10.19 bolt circle, .28 diameter mounting holes
305 10-1/2” leads
306 1/4-20 UNC-2B tapped holes on a 4.67 diameter bolt
circle
307 1/2” shaft, sleeve and key adapter to 5/8 shaft
308 1/2” hub on shaft end frame with slinger. Grommet
on lead exits.
309 1/2” extended thru bolts
310 1/2” double flat shaft, 2 1/2 rings
311 1/2” dia. Shaft - single flat
312 1.40 Service factor
313 1” extended thru bolts each end
314 1” extended thru bolts
315 1-7/8” shaft end, 1/2 lead end extended thru bolts
316 1-5/8” shaft end, 7/8 lead end extended thru bolts
317 1-5/8” extended thru bolts
318 1-1/2” extended thru bolts
319 C Dimension is the total length including shaft
320 56Y = 7/8” diameter keyed shaft, 2.25 long
321 Bohn/Heatcraft mounting hardware and OEM fan
blade included.
322 Mechanically Reversible
323 Kit includes three fans: 4” blade, 5.50” dia., CCW
rot., 5” blade, 5.50” dia. CCW rot. 5” blade, 4.00”
dia. CW rot.
324 Motor fits tongue mount
325 Can be mounted vertically by adding 10301702
cover (sold separately)
326 Cast Iron
327 Carrier Sensor Assembly (50HJ 401 484) not
included
328 Square Frame
329 For use with adjustable base
330 56Z = 1/2” shaft with flat, 1.62” long
331 Cannot be mounted with rings – ring to ring
dimension is body length
332 No connector plug, leads only
333 Aluminum shell
334 Reversible
335 Energy Efficient, cap start, low speed, PSC high
speed
336 Capacitor start, low speed, PSC high speed
337 Connection diagram may be #23, old #125 or new
#125 depending on date of manufacture
338 Taco replacement
339 Armstrong replacement
340 Bell and Gosset replacement
341 1/2” dia. - shaft 2.25” long
342 5/8” dia. - shaft 2.37” long
343 5/8” keyed shaft - 3.88” long
344 5/8” keyed shaft - 2.31” long
345 Rigid base - wall mount
346 65 degree C ambient
347 3 thru bolts, 4.62 dia, bolt circle
348 6-1/2” diameter body
349 2-1/4” mounting rings
350 Conduit connector included
351 eMod equipped motor
352 Pentair, almond paint, direct replacement motor
353 56Z = 5/8” diameter keyed shaft, 2-1/8” long
354 56Z = 7/8” diameter keyed shaft, 2-1/4” long
355 Base 805C290H04 and Clamps 165B674A01
available
356 3 rear mounting holes
357 4 thru bolts, 4.42” dia. bolt circle
358 4 thru bolts, on 4.62 dia. bolt circle
359 4 studs with spacer and nut on a 3.87 diameter bolt
circle
360 4 thru bolts on a 5.15 dia. bolt circle
361 9 leads
362 12 lead – capability for Y Start-Delta Run
363 Double shielded bearings with no regreasing
provisions
364 Open bearings with regreasing provisions
365 3 leads
366 6 leads
367 12 leads
368 Inverter Duty
369 Automatic Protector
370 48” leads
371 Removable 56H rigid base
372 VCM™ Feature (Voltage Change Module)
No. Footnote Description
No. Footnote Description
No. Footnote Description
1,2,3,4,5,6,7,8 10,11,12,13,14,15,16,17,18,19,...324