Page 236 - 2018wd_ctr_cat

FAN & LIMIT CONTROLS
STANDARD TYPE
CAMSTAT FAN CONTROLS FOR FURNACE MOTORS UP TO 3/4 HP.
Adjustable Fan-off and differ- ential settings provide a wide range for duplicating the orig- inal control temperatures. Select correct element length & width from the chart and order by Part Number.
HEAT-ASSIST TYPE
Built-in heater,. 1A 24VAC, for assured fan turn-on in 30 to 60 seconds. Adjustable fan-off 80-110F. Corrects "Short-cycling" of fan motor. Element width 1".
Part No.
F564
F565
F566
F567 F47TS-7T-110 F562 F214-12A-140-25C F563 F214-13A-140-25C
Width Length
Replaces
Element
Number
Type
F47-3TD-120-25C F47-7TD-120-25C F47TS-3T-110
Standard Standard Heat-Assist Heat-Assist Standard Standard
7/16" 3 7/16" 7" 1" 3" 1" 7" 11/16" 3" 11/16" 7"
CAMSTAT LIMIT CONTROLS
Replace This Part No.
Replaces
With This
(Fo) Adjustable Temp. Range
Length
Adjust temperature to match origi- nal control for exact replacement of hundreds of OEM Part Numbers. Models have Gold contacts for better performance in millivolt circuits as well as 24V and line voltage. Models are provided with a double-throw switch. Fixed differential is 30°F
Number
F568 L59-38T250 120-250 F569 L59-7BT250 120-250
3 7
FLUSH MOUNT ADJUSTABLE THERMOSTATS
FAN CONTROL 70o to 160o Part Number 757-1 (71570)
LIMIT CONTROL 110o to 200o Part Number 758-1 (71572)
COMPACT 1" X 3"
Discontinued Limited To Quantities On Hand
HF110DC FURNACE THERMOSTAT
HF110DC - Deep Cut Design
Furnace Thermostat for Mobile Homes
Closes at 110oF with 20o Differential
230
Part numbers and illustrations are for identification only © 1971-2018 w.d. armstrong corp.
Thermostat extends 3/4” into furnace. SPST switch with 1/4” tab terminals. Mounting holes 15⁄8” center-to-center. Used on many mobile home systems.