Page 105 - FASCO 2013

Thermally protected • UL recognized • CSA or ULc certified
NOTE: Rotation is determined by looking at shaft end. Shaft length is measured from motor face.
105
Specific Purpose Blowers Heading
Kits and Fan Blade Acc sories Accessories
NEW ITEM! See page 113 for a complete listing of all our new products.
HEX HUB FEATURES
• Sizes to fit most applications
• Simple screw design
• Zinc plated steel
• Pre-tapped holes with mounting and set screws started
INTERCHANGEABLE HEX HUBS
PART NO. BORE NO. SET SCREWS
H5 5/16 1
H6 3/8 1
H8 1/2 2
H10 5/8 2
Packaged 12 per carton.
Fan Blade Accessories
BUSHING FEATURES
• Two bolt design
• Two 1/4-20 x 3/4” cap screws provided
• Malleable iron construction
• For 1/2”-13/8” bore ranges
SPLIT TAPERED BUSHINGS “H” SERIES
PART NO. BORE
STB1 1/2
STB2 5/8
STB3 3/4
STB4 7/8
STB5 1
STB6 1 1/8
STB7 1 3/16
STB8 1 3/8
Packaged one per kit.
Fas Mount Bracket Kits
FM50
Motor diameter 5.0”
Bolt circle 9” and 10.18”
FM55
Motor diameter 5.5”
Bolt circle 9” and 10.18”
These kits are designed for direct drive blower motors
using the flexible bracket mounting arrangement.
Grommets and eyelets are included.
Band Mounting Kits
PART NO. MOTOR DIA. LUG SIZE BOLT CIRCLE
RANGE
NO55L 5.5” Large 8 1/8 - 12 1/8
NO55S 5.5” Small 6 7/8 - 8 1/8
KIT34 3.3” Large 4 11/16 - 9 7/8
KIT50 5.0” Large 6 7/16 - 11 11/16
KIT49 3 small lugs for Kit 55S
KIT150 4 grommets to fit lugs on Kits 34, 49, 50, 55L, 55S
NO50L 4.4” & 5.0” Large 6 1/2 - 11 8/16
NO33L 3.3” Large 4 1/2 - 10
KIT315 5.0” Large 9.8
KIT317 5.6” Large 9.8
NO55L, NO55S, KIT34, KIT50 KIT150 KIT49
NO50L, NO33L KIT315, KIT317
FM55 replaces this type bracket
FM554